Nokea
A 780-watt refrigerator is powered by a 120-volt power source. What is the current being drawn?
- A. 660 amperes
- B. 150 amperes
- C. 6.5 amperes
- D. 0.15 amperes
Correct Answer: C
Rationale: To calculate the current being drawn by the refrigerator, you can use the formula: Current (I) = Power (P) / Voltage (V). Given that the power of the refrigerator is 780 watts and the voltage is 120 volts, you can plug these values into the formula to find the current: I = 780 watts / 120 volts = 6.5 amperes. Therefore, the current being drawn by the 780-watt refrigerator is 6.5 amperes. Choice A, 660 amperes, is incorrect as it is significantly higher than the correct answer. Choice B, 150 amperes, is also incorrect and too high. Choice D, 0.15 amperes, is incorrect as it is too low. The correct answer is 6.5 amperes.
You may also like to solve these questions
A common example of a shear-thinning (non-Newtonian) fluid is:
- A. Water
- B. Ketchup
- C. Air
- D. Alcohol
Correct Answer: B
Rationale: The correct answer is B: Ketchup. Shear-thinning fluids become less viscous under stress. Ketchup is an example of a shear-thinning fluid because its viscosity decreases when it is shaken or squeezed, allowing it to flow more easily.
Choice A, Water, is a Newtonian fluid with a constant viscosity regardless of stress. Choice C, Air, is also a Newtonian fluid. Choice D, Alcohol, does not exhibit shear-thinning behavior; it typically has a constant viscosity as well.
When a small object floats on the surface of a liquid, the surface tension creates a:
- A. Buoyant force acting upwards
- B. Pressure difference causing sinking
- C. Drag force opposing motion
- D. Restoring force towards equilibrium
Correct Answer: D
Rationale: Surface tension creates a restoring force that holds the object on the surface. The liquid's surface behaves like a stretched membrane, and when disturbed, it tends to return the object to its original position, creating a restoring force. The other choices are incorrect: A buoyant force acts on objects submerged in a fluid, not floating on the surface; pressure differences usually affect sinking objects, not floating ones; drag force is a resistance force that opposes motion, not related to surface tension.
Viscosity, μ, is a transport property of a fluid that reflects its:
- A. Inertia
- B. Resistance to flow
- C. Compressibility
- D. Buoyancy generation
Correct Answer: B
Rationale: Viscosity refers to a fluid's resistance to flow. A fluid with high viscosity (like honey) flows slowly, while a fluid with low viscosity (like water) flows more easily. It is a measure of internal friction in the fluid. Choice A, 'Inertia,' is incorrect as inertia is the tendency of an object to resist changes in its state of motion. Choice C, 'Compressibility,' is incorrect as it refers to the ability of a fluid to be compressed. Choice D, 'Buoyancy generation,' is incorrect as it relates to the upward force exerted by a fluid that opposes the weight of an immersed object.
When a fluid flows past a solid object, a thin layer of fluid adheres to the object's surface due to:
- A. Buoyancy
- B. Bernoulli's principle
- C. Boundary layer effect
- D. Surface tension minimization
Correct Answer: C
Rationale: The boundary layer effect occurs when a thin layer of fluid near the surface of a solid adheres to it due to viscosity. This layer experiences a velocity gradient as the fluid farther from the surface moves faster, while the fluid closest to the surface is nearly stationary.
If a wave has a frequency of 60 hertz, which of the following is true?
- A. It completes one cycle per minute.
- B. It measures 60 m from crest to crest.
- C. It completes 60 cycles per second.
- D. It measures 60 m from crest to trough.
Correct Answer: C
Rationale: The frequency of a wave is the number of cycles it completes in one second. A wave with a frequency of 60 hertz completes 60 cycles per second. Therefore, choice C is correct. Choice A is incorrect because a frequency of 60 hertz means 60 cycles per second, not per minute. Choice B is incorrect as the frequency of the wave does not determine the distance from crest to crest. Choice D is also incorrect as the frequency does not relate to the distance from crest to trough.