Nokea
According to the Clausius inequality, for a cyclic process involving heat transfer between a system and its surroundings at a single constant temperature (T), the following inequality must hold true:
- A. There is no relationship between heat transfer and temperature in a cyclic process.
- B. ∫ dQ/T ≥ 0
- C. ∫ Q/T = constant
- D. ∫ dQ/T ≤ 0
Correct Answer: D
Rationale: The Clausius inequality states that for a cyclic process involving heat transfer at a single constant temperature, the integral of heat transfer divided by temperature (∫ dQ/T) must be less than or equal to zero. This inequality reflects the irreversibility of natural processes. Choice A is incorrect as there is a direct relationship between heat transfer and temperature in the Clausius inequality. Choice B is incorrect because the integral of dQ/T must be less than or equal to zero, not greater than or equal to zero. Choice C is incorrect because the integral of Q/T is not a constant in a cyclic process involving heat transfer at a single constant temperature.
You may also like to solve these questions
A caterpillar starts moving at a rate of 14 in/hr. After 15 minutes, it is moving at a rate of 20 in/hr. What is the caterpillar's rate of acceleration?
- A. 6 in/hr²
- B. 12 in/hr²
- C. 24 in/hr²
- D. 280 in/hr²
Correct Answer: C
Rationale: Acceleration is the change in velocity over time. The change in velocity for the caterpillar is 20 in/hr - 14 in/hr = 6 in/hr. Since this change occurred over 15 minutes (or 0.25 hours), the acceleration can be calculated as (6 in/hr) / (0.25 hr) = 24 in/hr². Therefore, the caterpillar's rate of acceleration is 24 in/hr², which corresponds to choice C. Choice A, 6 in/hr², is incorrect as it does not account for the time factor and the correct calculation. Choice B, 12 in/hr², is incorrect as it doubles the correct acceleration value. Choice D, 280 in/hr², is significantly higher than the correct value, indicating a calculation error.
A spring has a spring constant of 20 N/m. How much force is needed to compress the spring from 40 cm to 30 cm?
- A. 200 N
- B. 80 N
- C. 5 N
- D. 2 N
Correct Answer: D
Rationale: The change in length of the spring is 40 cm - 30 cm = 10 cm = 0.10 m. The force required to compress or stretch a spring is given by Hooke's Law: F = k x, where F is the force, k is the spring constant (20 N/m in this case), and x is the change in length (0.10 m). Substituting the values into the formula: F = 20 N/m 0.10 m = 2 N. Therefore, the correct answer is 2 N. Choice A (200 N) is incorrect because it miscalculates the force. Choice B (80 N) is incorrect as it does not apply Hooke's Law correctly. Choice C (5 N) is incorrect as it underestimates the force required.
The triple point of a substance is the specific temperature and pressure at which all three phases (solid, liquid, and gas) can coexist in thermodynamic equilibrium. Which of the following statements about the triple point is true?
- A. It can vary depending on the container size.
- B. It is a unique point for each pure substance.
- C. The pressure at the triple point can be zero for some substances.
- D. The temperature at the triple point can be above the boiling point of the liquid phase.
Correct Answer: B
Rationale: The triple point is a unique temperature and pressure where all three phases (solid, liquid, and gas) of a pure substance can coexist in equilibrium. It is a constant for each substance and independent of container size. Choice A is incorrect because the triple point is a fixed point regardless of the container size. Choice C is incorrect as the pressure at the triple point is specific for each substance and will not be zero unless the substance has unique properties. Choice D is incorrect since the temperature at the triple point is precisely defined and cannot be above the boiling point of the liquid phase.
In a static fluid, pressure (P) at a depth (h) is governed by the hydrostatic equation:
- A. P = Ïgh
- B. P = γh
- C. P = μgh
- D. P = bh
Correct Answer: A
Rationale: The correct formula for the pressure at a certain depth in a fluid according to the hydrostatic equation is P = Ïgh. Here, Ï represents the fluid's density, g is the gravitational acceleration, and h is the depth. This formula shows that pressure increases linearly with the density of the fluid, the acceleration due to gravity, and the depth. Choices B, C, and D are incorrect because they do not accurately represent the relationship between pressure, density, gravitational acceleration, and depth in a static fluid.
The strength of a magnetic field is measured in units of:
- A. Amperes
- B. Tesla
- C. Volts
- D. Coulombs
Correct Answer: B
Rationale: The Tesla (T) is the unit of measurement for the strength of a magnetic field. One Tesla is defined as one weber per square meter. Amperes (choice A) measure electric current, Volts (choice C) measure electric potential, and Coulombs (choice D) measure electric charge, making them incorrect choices for measuring the strength of a magnetic field.