Nokea
A 110-volt appliance draws 0 amperes. How many watts of power does it require?
- A. 0 watts
- B. 108 watts
- C. 112 watts
- D. 220 watts
Correct Answer: A
Rationale: When a 110-volt appliance draws 0 amperes, it means that the power consumption is zero as well. The formula to calculate power is P = V x I, where P is power in watts, V is voltage in volts, and I is current in amperes. Since the current is 0 amperes, the power required by the appliance is also 0 watts. Therefore, the correct answer is 0 watts. Choice B, 108 watts, is incorrect because there is no current drawn. Choice C, 112 watts, and choice D, 220 watts, are incorrect as well since the appliance is not consuming any power when drawing 0 amperes.
You may also like to solve these questions
When a gas is compressed isothermally, we can say that:
- A. The gas performs work on the surroundings, and its internal energy increases.
- B. The gas performs work on the surroundings, and its internal energy decreases.
- C. The surroundings perform work on the gas, and its internal energy increases.
- D. The surroundings perform work on the gas, and its internal energy decreases.
Correct Answer: D
Rationale: When a gas is compressed isothermally, the surroundings perform work on the gas. In this process, since the temperature remains constant (isothermal), the internal energy of the gas does not change. Therefore, the correct answer is that the surroundings perform work on the gas, and its internal energy decreases. Choices A, B, and C are incorrect because they incorrectly describe the direction of work and the change in internal energy during an isothermal compression.
Ocean waves build during a storm until there is a vertical distance from the high point to the low point of 6 meters and a horizontal distance of 9 meters between adjacent crests. The waves hit the shore every 5 seconds. What is the speed of the waves?
- A. 1.2 m/s
- B. 1.8 m/s
- C. 2.0 m/s
- D. 2.4 m/s
Correct Answer: B
Rationale: To find the speed of the waves, we use the formula: speed = wavelength / period. The wavelength is the horizontal distance between adjacent crests, which is 9 meters in this case. The period is the time it takes for one wave to pass a fixed point, given as 5 seconds. Therefore, speed = 9 meters / 5 seconds = 1.8 m/s. Choice A (1.2 m/s) is incorrect because it miscalculates the speed. Choice C (2.0 m/s) and Choice D (2.4 m/s) are incorrect as they do not correctly calculate the speed using the provided data.
An object with a charge of 3 μC is placed 30 cm from another object with a charge of 2 μC. What is the magnitude of the resulting force between the objects?
- A. 0.6 N
- B. 0.18 N
- C. 180 N
- D. 9 10−12 N
Correct Answer: B
Rationale: To find the magnitude of the resulting force between two charges, we use Coulomb's Law:
F = k (|q1 q2|) / r²
Where:
F is the force
k is Coulomb's constant (8.99 10â¹ N·m²/C²)
q1 and q2 are the charges
r is the distance between the charges
Plugging in the values:
F = (8.99 10â¹) (3 10â»â¶) (2 10â»â¶) / (0.3)² = 0.18 N.
Therefore, the magnitude of the resulting force is 0.18 N.
When analyzing a power plant, which of the following is NOT considered a part of the system?
- A. The fuel being burned.
- B. The working fluid (e.g., steam or water).
- C. The turbine that generates electricity.
- D. The surrounding air.
Correct Answer: D
Rationale: In a power plant system, the components directly involved in the energy conversion process are considered part of the system. The fuel being burned provides the heat source, the working fluid transfers this heat energy, and the turbine converts it into mechanical energy to generate electricity. The surrounding air, while it may interact with the system, is not a component that directly participates in the energy conversion process within the power plant system. Therefore, the correct answer is D - The surrounding air. Choices A, B, and C are essential components of a power plant system as they play direct roles in the energy conversion process, unlike the surrounding air.
When a fluid encounters a bluff body (e.g., a car), the flow can separate behind the object, creating a region of low pressure. This phenomenon is known as:
- A. Cavitation
- B. Boundary layer separation
- C. Bernoulli effect per se
- D. Drag crisis
Correct Answer: B
Rationale: The correct answer is B: Boundary layer separation. Boundary layer separation occurs when the flow of fluid detaches from the surface of a bluff body, leading to a low-pressure region behind the object. This separation creates a wake region with reduced pressure. Choice A, Cavitation, refers to the formation of vapor bubbles in a fluid and is not relevant in this context. Choice C, Bernoulli effect per se, does not specifically describe the phenomenon of flow separation behind a bluff body. Choice D, Drag crisis, is not the term used to describe the creation of a low-pressure region due to flow separation.