Nokea
An object with a charge of 4 μC is placed 50 cm from another object with a charge twice as great. What is the magnitude of the resulting repulsive force?
- A. 0.1152 N
- B. 1.152 N
- C. 10^−3 N
- D. 2.5 10^−3 N
Correct Answer: D
Rationale: The force between two charges is calculated using Coulomb's Law, which states that the force is proportional to the product of the two charges and inversely proportional to the square of the distance between them. Given that one charge is twice as great as the other and the distance between them is 50 cm, we can calculate the repulsive force. The magnitude of the resulting repulsive force is 2.5 10^−3 N. Choice A is incorrect as it does not match the calculated value. Choice B is incorrect as it is significantly higher than the correct answer. Choice C is incorrect as it represents 10^−3 N, which is lower than the calculated value.
You may also like to solve these questions
For steady, incompressible flow through a pipe, the mass flow rate (á¹) is related to the fluid density (Ï), cross-sectional area (A), and average velocity (v) via the continuity equation:
- A. á¹ cannot be determined without additional information
- B. á¹ = ÏvA
- C. Bernoulli's principle is solely applicable here
- D. The equation of state for the specific fluid is required
Correct Answer: B
Rationale: The continuity equation for steady, incompressible flow states that the mass flow rate is the product of the fluid's density, velocity, and cross-sectional area. Hence, á¹ = ÏvA. Choice A is incorrect because the mass flow rate can be determined using the given formula. Choice C is incorrect as Bernoulli's principle does not directly relate to the mass flow rate calculation. Choice D is incorrect as the equation of state is not needed to calculate the mass flow rate in this scenario.
A caterpillar starts moving at a rate of 14 in/hr. After 15 minutes, it is moving at a rate of 20 in/hr. What is the caterpillar's rate of acceleration?
- A. 6 in/hr²
- B. 12 in/hr²
- C. 24 in/hr²
- D. 280 in/hr²
Correct Answer: C
Rationale: Acceleration is the change in velocity over time. The change in velocity for the caterpillar is 20 in/hr - 14 in/hr = 6 in/hr. Since this change occurred over 15 minutes (or 0.25 hours), the acceleration can be calculated as (6 in/hr) / (0.25 hr) = 24 in/hr². Therefore, the caterpillar's rate of acceleration is 24 in/hr², which corresponds to choice C. Choice A, 6 in/hr², is incorrect as it does not account for the time factor and the correct calculation. Choice B, 12 in/hr², is incorrect as it doubles the correct acceleration value. Choice D, 280 in/hr², is significantly higher than the correct value, indicating a calculation error.
When a small object floats on the surface of a liquid, the surface tension creates a:
- A. Buoyant force acting upwards
- B. Pressure difference causing sinking
- C. Drag force opposing motion
- D. Restoring force towards equilibrium
Correct Answer: D
Rationale: Surface tension creates a restoring force that holds the object on the surface. The liquid's surface behaves like a stretched membrane, and when disturbed, it tends to return the object to its original position, creating a restoring force. The other choices are incorrect: A buoyant force acts on objects submerged in a fluid, not floating on the surface; pressure differences usually affect sinking objects, not floating ones; drag force is a resistance force that opposes motion, not related to surface tension.
In a static fluid, pressure (P) at a depth (h) is governed by the hydrostatic equation:
- A. P = Ïgh
- B. P = γh
- C. P = μgh
- D. P = bh
Correct Answer: A
Rationale: The correct formula for the pressure at a certain depth in a fluid according to the hydrostatic equation is P = Ïgh. Here, Ï represents the fluid's density, g is the gravitational acceleration, and h is the depth. This formula shows that pressure increases linearly with the density of the fluid, the acceleration due to gravity, and the depth. Choices B, C, and D are incorrect because they do not accurately represent the relationship between pressure, density, gravitational acceleration, and depth in a static fluid.
Electric motors convert electrical energy primarily into:
- A. Thermal energy
- B. Light
- C. Mechanical energy
- D. Sound waves
Correct Answer: C
Rationale: Electric motors convert electrical energy into mechanical energy. When electricity passes through the coils in the motor, it creates a magnetic field that interacts with the field from the permanent magnets, resulting in a force that drives motion. Choice A, 'Thermal energy,' is incorrect as electric motors are designed to minimize heat production. Choice B, 'Light,' is incorrect as electric motors do not produce light as a primary output. Choice D, 'Sound waves,' is incorrect as the primary output of an electric motor is mechanical motion, not sound waves.