Nokea
For a compressible fluid subjected to rapid pressure changes, sound wave propagation becomes important. The speed of sound (c) depends on the fluid's:
- A. Density (Ï) only
- B. Viscosity (μ) only
- C. Density (Ï) and Bulk modulus
- D. Density (Ï) and Surface tension (γ)
Correct Answer: C
Rationale: In a compressible fluid, the speed of sound (c) depends on both the fluid's density (Ï) and Bulk modulus. Density affects the compressibility of the fluid, while Bulk modulus represents the fluid's resistance to compression and plays a crucial role in determining the speed of sound in a compressible medium. Viscosity and surface tension do not directly impact the speed of sound in a compressible fluid subjected to rapid pressure changes. Therefore, the correct answer is C.
You may also like to solve these questions
A closed system undergoes a cyclic process, returning to its initial state. What can be said about the net work done (Wnet) by the system over the entire cycle?
- A. Wnet is always positive.
- B. Wnet is always negative.
- C. Wnet can be positive, negative, or zero.
- D. Wnet is equal to the total heat transferred into the system (dQ ≠0 for a cycle).
Correct Answer: C
Rationale: For a closed system undergoing a cyclic process and returning to its initial state, the net work done (Wnet) over the entire cycle can be positive, negative, or zero. This is because the work done is determined by the area enclosed by the cycle on a P-V diagram, and this area can be above, below, or intersecting the zero work axis, leading to positive, negative, or zero net work done. Choice A is incorrect because Wnet is not always positive; it depends on the specific path taken on the P-V diagram. Choice B is incorrect as Wnet is not always negative; it varies based on the enclosed area. Choice D is incorrect because Wnet is not necessarily equal to the total heat transferred into the system; it depends on the specifics of the cycle and is not a direct relationship.
A 5-cm candle is placed 20 cm away from a concave mirror with a focal length of 10 cm. What is the image distance of the candle?
- A. 20 cm
- B. 40 cm
- C. 60 cm
- D. 75 cm
Correct Answer: C
Rationale: To find the image distance of the candle, we use the mirror formula: 1/f = 1/do + 1/di, where f is the focal length, do is the object distance, and di is the image distance. In this case, the focal length f = 10 cm and the object distance do = 20 cm. Substituting these values into the formula gives us 1/10 = 1/20 + 1/di. Solving for di, we get di = 60 cm. Therefore, the image distance of the candle is 60 cm. Choice A (20 cm) is incorrect because it represents the object distance, not the image distance. Choice B (40 cm) is incorrect as it does not consider the mirror formula calculation. Choice D (75 cm) is incorrect as it does not match the correct calculation based on the mirror formula.
The frequency of an alternating current (AC) refers to the number of times it changes direction per unit time. This is measured in:
- A. Hertz
- B. Amperes
- C. Volts
- D. Ohms
Correct Answer: A
Rationale: The frequency of an alternating current (AC) is measured in Hertz (Hz), which denotes the number of times the current changes direction per unit time. Hertz is the unit for frequency, while amperes measure current, volts measure voltage, and ohms measure resistance. Therefore, the correct answer is Hertz (Hz). Choices B, C, and D are incorrect because amperes measure current intensity, volts measure voltage potential, and ohms measure resistance, not the frequency of an alternating current.
In an adiabatic process, there is:
- A. No heat transfer (Q = 0) between the system and the surroundings.
- B. Isothermal compression or expansion (constant temperature).
- C. Constant pressure throughout the process (isobaric process).
- D. No change in the system's internal energy (energy is conserved according to the first law).
Correct Answer: A
Rationale: In an adiabatic process, choice A is correct because adiabatic processes involve no heat transfer between the system and its surroundings (Q = 0). This lack of heat transfer is a defining characteristic of adiabatic processes. Choices B, C, and D do not accurately describe an adiabatic process. Choice B refers to an isothermal process where temperature remains constant, not adiabatic. Choice C describes an isobaric process with constant pressure, not specific to adiabatic processes. Choice D mentions the conservation of energy but does not directly relate to the absence of heat transfer in adiabatic processes.
Why are boats more buoyant in salt water than in fresh water?
- A. Salt decreases the mass of the boats.
- B. Salt increases the volume of the water.
- C. Salt affects the density of the boats.
- D. Salt increases the density of the water.
Correct Answer: D
Rationale: Salt increases the density of water, making saltwater more buoyant than freshwater. The higher density of saltwater provides more lift to a boat, enabling it to float more easily compared to in freshwater. Choice A is incorrect because salt does not affect the mass of the boats. Choice B is incorrect as salt does not increase the volume of water. Choice C is incorrect since salt affects the density of water, not the boats themselves. Therefore, the correct answer is that salt increases the density of the water, resulting in boats being more buoyant in salt water than in fresh water.