Nokea
Household alternating current typically has a frequency of 60 Hz. Which statement is true?
- A. The circuit is suitable for lighting 60-watt bulbs.
- B. Circuits in the home may carry a current of 60 amperes.
- C. The expected voltage drop is 60 volts per meter.
- D. Electrons complete a cycle 60 times per second.
Correct Answer: D
Rationale: The correct answer is D. Electrons complete a cycle 60 times per second when the frequency of the current is 60 Hz. This frequency indicates that the current changes direction 60 times per second, causing the electrons to complete a full cycle back and forth through the circuit at the same rate. Choice A is incorrect because the power rating of a bulb (in watts) is not directly related to the frequency of the current. Choice B is incorrect as typical household circuits do not carry currents as high as 60 amperes. Choice C is incorrect as the expected voltage drop is not measured in volts per meter for household alternating current circuits.
You may also like to solve these questions
Marilyn is driving to a wedding. She drives 4 miles south before realizing that she left the gift at home. She makes a U-turn, returns home to pick up the gift, and sets out again driving south. This time, she drives 1 mile out of her way to pick up a friend. From there, they continue 5 miles more to the wedding. Which of these statements is true about Marilyn's trip?
- A. The displacement of her trip is 6 miles, and the distance traveled is 6 miles.
- B. The displacement of her trip is 14 miles, and the distance traveled is 14 miles.
- C. The displacement of her trip is 8 miles, and the distance traveled is 14 miles.
- D. The displacement of her trip is 6 miles, and the distance traveled is 14 miles.
Correct Answer: C
Rationale: Marilyn's displacement is calculated based on her final position relative to the starting point. She drives 1 mile to pick up her friend, then 5 miles more to the wedding, totaling 6 miles after returning to her home. So, the correct displacement is 8 miles south from her starting point (4 miles to the gift + 4 miles return + 1 mile to the friend + 5 miles to the wedding). The total distance traveled is 14 miles (adding all the distances). Choice A is incorrect because it miscalculates the displacement. Choice B is incorrect as it overestimates both the displacement and distance traveled. Choice D is incorrect as it underestimates the displacement.
When a gas is compressed isothermally, we can say that:
- A. The gas performs work on the surroundings, and its internal energy increases.
- B. The gas performs work on the surroundings, and its internal energy decreases.
- C. The surroundings perform work on the gas, and its internal energy increases.
- D. The surroundings perform work on the gas, and its internal energy decreases.
Correct Answer: D
Rationale: When a gas is compressed isothermally, the surroundings perform work on the gas. In this process, since the temperature remains constant (isothermal), the internal energy of the gas does not change. Therefore, the correct answer is that the surroundings perform work on the gas, and its internal energy decreases. Choices A, B, and C are incorrect because they incorrectly describe the direction of work and the change in internal energy during an isothermal compression.
What is the kinetic energy of a 500-kg wagon moving at 10 m/s?
- A. 50 J
- B. 250 J
- C. 2.5 10^4 J
- D. 5.0 10^5 J
Correct Answer: C
Rationale: The formula for calculating kinetic energy is KE = 0.5 mass velocity². Given the mass of the wagon is 500 kg and the velocity is 10 m/s, we can substitute these values into the formula: KE = 0.5 500 kg (10 m/s)² = 0.5 500 kg 100 m²/s² = 25,000 J or 2.5 10â´ J. Therefore, the kinetic energy of the 500-kg wagon moving at 10 m/s is 2.5 10â´ J. Choice A (50 J) is incorrect because it is too low; Choice B (250 J) is incorrect as it does not match the correct calculation; Choice D (5.0 10^5 J) is incorrect as it is too high. The correct answer is C (2.5 10^4 J).
Which conclusion can be drawn from Ohm's law?
- A. Voltage and current are inversely proportional when resistance is constant.
- B. The ratio of the potential difference between the ends of a conductor to current is a constant, R.
- C. Voltage is the amount of charge that passes through a point per second.
- D. Power (P) can be calculated by multiplying current (I) by voltage (V).
Correct Answer: B
Rationale: Ohm's law states that the ratio of the potential difference (voltage) between the ends of a conductor to the current flowing through it is a constant. Mathematically, this is represented as V = I x R, where V is voltage, I is current, and R is the constant resistance. Therefore, the correct conclusion that can be drawn from Ohm's law is that the ratio of the potential difference between the ends of a conductor to current is a constant, denoted as R. This relationship is fundamental to understanding the behavior of electrical circuits and the effect of resistance on voltage and current. Choice A is incorrect because Ohm's law actually states that voltage and current are directly proportional when resistance is constant. Choice C is incorrect because voltage is not the amount of charge that passes through a point per second; rather, it is the electric potential energy per unit charge. Choice D is incorrect because although power (P) can be calculated by multiplying current (I) by voltage (V), this is not a conclusion directly drawn from Ohm's law.
The efficiency (η) of a heat engine is defined as the ratio of the net work done (Wnet) by the engine to the heat input (Qh) from the hot reservoir. The relationship is expressed as:
- A. η = Wnet / Qh
- B. η = Qh / Wnet
- C. η = Wnet x Qh
- D. η = (Wnet + Qh) / 2
Correct Answer: A
Rationale: The correct formula for efficiency (η) of a heat engine is η = Wnet / Qh. Efficiency is defined as the ratio of the net work done by the engine (Wnet) to the heat input from the hot reservoir (Qh). This formula shows how effectively the engine converts heat into useful work, making choice A the correct answer. Choices B, C, and D present incorrect relationships between efficiency, net work done, and heat input, leading to their incorrectness.