Nokea
The Reynolds number (Re) is a dimensionless quantity used to characterize:
- A. Fluid density
- B. Flow regime (laminar vs. turbulent)
- C. Surface tension effects
- D. Buoyancy force magnitude
Correct Answer: B
Rationale: The Reynolds number is a dimensionless quantity used to characterize the flow regime, specifically whether it is laminar (smooth) or turbulent (chaotic). It depends on the velocity of the fluid, its characteristic length (such as pipe diameter), and its viscosity. A low Reynolds number indicates laminar flow, while a high Reynolds number suggests turbulence. Choices A, C, and D are incorrect because the Reynolds number is not related to fluid density, surface tension effects, or buoyancy force magnitude.
You may also like to solve these questions
The strength of a magnetic field is measured in units of:
- A. Amperes
- B. Tesla
- C. Volts
- D. Coulombs
Correct Answer: B
Rationale: The Tesla (T) is the unit of measurement for the strength of a magnetic field. One Tesla is defined as one weber per square meter. Amperes (choice A) measure electric current, Volts (choice C) measure electric potential, and Coulombs (choice D) measure electric charge, making them incorrect choices for measuring the strength of a magnetic field.
As the frequency of a sound wave increases, what else is true?
- A. Its wavelength decreases.
- B. Its wavelength increases.
- C. Its amplitude decreases.
- D. Its amplitude increases.
Correct Answer: A
Rationale: The correct answer is A: 'Its wavelength decreases.' The frequency and wavelength of a sound wave are inversely proportional. As the frequency of a sound wave increases (more oscillations per second), its wavelength decreases. This relationship is described by the formula: Speed of Sound = Frequency x Wavelength. Therefore, to maintain the speed of sound constant, when the frequency increases, the wavelength must decrease. Choices B, C, and D are incorrect because an increase in frequency does not lead to an increase in wavelength or changes in amplitude.
A caterpillar starts moving at a rate of 14 in/hr. After 15 minutes, it is moving at a rate of 20 in/hr. What is the caterpillar's rate of acceleration?
- A. 6 in/hr²
- B. 12 in/hr²
- C. 24 in/hr²
- D. 280 in/hr²
Correct Answer: C
Rationale: Acceleration is the change in velocity over time. The change in velocity for the caterpillar is 20 in/hr - 14 in/hr = 6 in/hr. Since this change occurred over 15 minutes (or 0.25 hours), the acceleration can be calculated as (6 in/hr) / (0.25 hr) = 24 in/hr². Therefore, the caterpillar's rate of acceleration is 24 in/hr², which corresponds to choice C. Choice A, 6 in/hr², is incorrect as it does not account for the time factor and the correct calculation. Choice B, 12 in/hr², is incorrect as it doubles the correct acceleration value. Choice D, 280 in/hr², is significantly higher than the correct value, indicating a calculation error.
Entropy (S) is a thermodynamic property related to the system's disorder. According to the second law of thermodynamics, in a spontaneous process:
- A. The total entropy of the system and surroundings increases.
- B. The total entropy of the system and surroundings decreases.
- C. The total entropy of the system remains constant.
- D. The total entropy of the surroundings increases, while the system's entropy decreases.
Correct Answer: A
Rationale: The second law of thermodynamics asserts that the entropy of an isolated system (or the combined system and surroundings) will always increase in a spontaneous process, reflecting an increase in disorder. Therefore, the correct answer is that the total entropy of the system and surroundings increases. Choice B is incorrect because entropy always tends to increase in a spontaneous process, as dictated by the second law of thermodynamics. Choice C is incorrect as entropy typically increases in natural processes. Choice D is incorrect because the second law of thermodynamics states that the total entropy of the system and surroundings always increases in a spontaneous process.
An object with a charge of 4 μC is placed 50 cm from another object with a charge twice as great. What is the magnitude of the resulting repulsive force?
- A. 0.1152 N
- B. 1.152 N
- C. 10^−3 N
- D. 2.5 10^−3 N
Correct Answer: D
Rationale: The force between two charges is calculated using Coulomb's Law, which states that the force is proportional to the product of the two charges and inversely proportional to the square of the distance between them. Given that one charge is twice as great as the other and the distance between them is 50 cm, we can calculate the repulsive force. The magnitude of the resulting repulsive force is 2.5 10^−3 N. Choice A is incorrect as it does not match the calculated value. Choice B is incorrect as it is significantly higher than the correct answer. Choice C is incorrect as it represents 10^−3 N, which is lower than the calculated value.