Nokea
The three important allotropic forms of phosphorus are red, white, and ___________.
- A. green
- B. gray
- C. black
- D. silver
Correct Answer: C
Rationale: The three important allotropic forms of phosphorus are red, white, and black. These forms indicate the different physical properties and reactivity of phosphorus under various conditions. Red phosphorus is more stable and less reactive than white phosphorus, while black phosphorus is the least reactive form. Choice C, 'black,' is the correct answer as it completes the sequence of allotropic forms of phosphorus. Choices A, 'green,' B, 'gray,' and D, 'silver,' are incorrect as they do not represent recognized forms of phosphorus.
You may also like to solve these questions
How much concentrated HCl should be used to prepare 500 mL of a 0.100 M HCl solution?
- A. 75 mL
- B. 100 mL
- C. 125 mL
- D. 150 mL
Correct Answer: B
Rationale: To prepare a 0.100 M HCl solution with a volume of 500 mL, you can use the formula C1V1 = C2V2, where C1 is the concentration of the concentrated HCl solution, V1 is the volume of concentrated HCl solution used, C2 is the desired concentration (0.100 M), and V2 is the final volume (500 mL). Rearranging the formula to solve for V1, you get V1 = (C2V2) / C1. Plugging in the values (0.100 M)(500 mL) / C1 = 100 mL, which means 100 mL of concentrated HCl should be used to prepare 500 mL of a 0.100 M HCl solution. Therefore, the correct answer is 100 mL. Choice A (75 mL), Choice C (125 mL), and Choice D (150 mL) are incorrect as they do not match the calculated volume needed to prepare the desired concentration of HCl solution.
What is the boiling point of water in °C?
- A. 90°C
- B. 100°C
- C. 95°C
- D. 80°C
Correct Answer: B
Rationale: The correct answer is 100°C. The boiling point of water in Celsius is 100°C, which is standard at sea level. This is the temperature at which water changes from a liquid to a gas phase under standard atmospheric pressure. Choice A (90°C), Choice C (95°C), and Choice D (80°C) are incorrect because they do not represent the standard boiling point of water at sea level.
If fifty-six kilograms of a radioactive substance has a half-life of 12 days, how many days will it take the substance to decay naturally to only 7 kilograms?
- A. 8
- B. 12
- C. 36
- D. 48
Correct Answer: C
Rationale: To decay from 56 kg to 7 kg, the substance needs to go through 3 half-lives (56 kg · 2 · 2 · 2 = 7 kg). Since each half-life is 12 days, the total time required is 12 days per half-life x 3 half-lives = 36 days. Choice A is incorrect because it does not consider the concept of half-lives. Choice B is incorrect because it represents the duration of a single half-life, not the total time required for the decay. Choice D is incorrect as it does not account for the multiple half-lives needed for the substance to decay from 56 kg to 7 kg.
Among the following elements, which is a nonmetal?
- A. Mercury
- B. Magnesium
- C. Sulfur
- D. Potassium
Correct Answer: C
Rationale: Sulfur is a nonmetal as it is located on the right side of the periodic table. Nonmetals generally exhibit properties such as being brittle, poor conductors of heat and electricity, and having lower melting points compared to metals. Mercury (A), Magnesium (B), and Potassium (D) are all metals due to their metallic properties. Mercury is a liquid metal at room temperature, Magnesium is a solid metal, and Potassium is a solid metal as well. Therefore, the correct answer is C, Sulfur.
Where would you expect tap water to fall on the pH scale?
- A. Between 1 and 3
- B. Between 4 and 6
- C. Between 6 and 8
- D. Between 8 and 10
Correct Answer: C
Rationale: Tap water typically falls within the pH range of 6 to 8, making it slightly acidic to neutral. Most municipal water systems aim to provide water that is safe for consumption and falls within this pH range. A pH level of 7 is considered neutral, so tap water may vary slightly on either side of this number but typically remains within the 6 to 8 range to ensure it is safe for consumption. Choices A, B, and D are incorrect because tap water is not expected to have a pH as low as 1-3 (highly acidic) or as high as 8-10 (alkaline); it usually falls within the slightly acidic to neutral range, hence falling between 6 and 8 on the pH scale.