Nokea
The amount of energy lost in a circuit due to electrical resistance is dissipated in the form of:
- A. Light
- B. Sound
- C. Heat
- D. Mechanical work
Correct Answer: C
Rationale: When electrical current flows through a circuit with resistance, energy is lost in the form of heat due to the resistance encountered by the electrons. This dissipation of energy as heat is a common phenomenon in electrical circuits and is known as Joule heating. Therefore, the correct answer is 'Heat.' Light, sound, and mechanical work are not typical forms in which energy is lost due to electrical resistance. Light is not a direct result of energy dissipation in electrical circuits, sound is not a form of energy dissipation in this context, and mechanical work pertains to the application of physical force and not the dissipation of energy due to resistance.
You may also like to solve these questions
As a vehicle positioned at the peak of a hill rolls downhill, its potential energy transforms into:
- A. Thermal energy
- B. Neither thermal nor kinetic energy
- C. A combination of thermal and kinetic energy
- D. Kinetic energy
Correct Answer: D
Rationale: The correct answer is D: Kinetic energy. Potential energy is converted into kinetic energy as the vehicle moves downhill. Kinetic energy is the energy possessed by a moving object. Thermal energy is not produced in this scenario because the energy transformation is mainly from potential to kinetic energy, not involving heat generation. Choices A, B, and C are incorrect because the primary energy transformation in this scenario is from potential to kinetic energy, not involving thermal energy.
A key parameter in fluid selection is specific gravity (SG). For a submerged object in a reference fluid (often water), SG = Ï_object / Ï_reference. An object with SG > 1 will:
- A. Experience a net buoyant force acting upwards
- B. Experience a net buoyant force acting downwards
- C. Remain neutrally buoyant
- D. Require knowledge of the object's volume for buoyancy determination
Correct Answer: A
Rationale: When the specific gravity (SG) of an object is greater than 1, it indicates that the object is denser than the reference fluid, which is often water. According to Archimedes' principle, an object with SG > 1 will experience a net buoyant force acting upwards when submerged in the fluid. This is because the buoyant force is greater than the weight of the object, causing it to float. Therefore, the correct answer is A: 'Experience a net buoyant force acting upwards.' Objects with SG < 1 would sink as they are less dense than the fluid, while objects with SG = 1 would be neutrally buoyant, neither sinking nor floating.
For a compressible fluid subjected to rapid pressure changes, sound wave propagation becomes important. The speed of sound (c) depends on the fluid's:
- A. Density (Ï) only
- B. Viscosity (μ) only
- C. Density (Ï) and Bulk modulus
- D. Density (Ï) and Surface tension (γ)
Correct Answer: C
Rationale: In a compressible fluid, the speed of sound (c) depends on both the fluid's density (Ï) and Bulk modulus. Density affects the compressibility of the fluid, while Bulk modulus represents the fluid's resistance to compression and plays a crucial role in determining the speed of sound in a compressible medium. Viscosity and surface tension do not directly impact the speed of sound in a compressible fluid subjected to rapid pressure changes. Therefore, the correct answer is C.
An airplane travels 500 miles northeast and then, on the return trip, travels 500 miles southwest. Which of the following is true?
- A. The displacement of the plane is 1,000 miles, and the distance traveled is 0 miles.
- B. The displacement of the plane is 1,000 miles, and the distance traveled is 1,000 miles.
- C. The displacement of the plane is 0 miles, and the distance traveled is 0 miles.
- D. The displacement of the plane is 0 miles, and the distance traveled is 1,000 miles.
Correct Answer: D
Rationale: The displacement of an object is the change in position from the starting point to the ending point, regardless of the path taken. In this case, the airplane returns to its original position after traveling 500 miles northeast and then 500 miles southwest. Therefore, the displacement is 0 miles. However, the distance traveled is the total path covered, which is 500 miles northeast plus 500 miles southwest, for a total of 1,000 miles. Choice A is incorrect because the displacement is not the sum of the distances traveled. Choice B is incorrect as it incorrectly states that both the displacement and the distance traveled are 1,000 miles. Choice C is incorrect as it states that both the displacement and the distance traveled are 0 miles, which is not the case.
The frequency of an alternating current (AC) refers to the number of times it changes direction per unit time. This is measured in:
- A. Hertz
- B. Amperes
- C. Volts
- D. Ohms
Correct Answer: A
Rationale: The frequency of an alternating current (AC) is measured in Hertz (Hz), which denotes the number of times the current changes direction per unit time. Hertz is the unit for frequency, while amperes measure current, volts measure voltage, and ohms measure resistance. Therefore, the correct answer is Hertz (Hz). Choices B, C, and D are incorrect because amperes measure current intensity, volts measure voltage potential, and ohms measure resistance, not the frequency of an alternating current.