Nokea
A 1,000-kg car drives at 10 m/s around a circle with a radius of 50 m. What is the centripetal acceleration of the car?
- A. 2 m/s²
- B. 4 m/s²
- C. 5 m/s²
- D. 10 m/s²
Correct Answer: A
Rationale: Centripetal acceleration is calculated using the formula a = v² / r, where v = 10 m/s and r = 50 m. Substituting these values: a = (10 m/s)² / 50 m = 100 / 50 = 2 m/s². Therefore, the correct answer is 2 m/s². Choice B, 4 m/s², is incorrect because it is not the result of the correct calculation. Choice C, 5 m/s², is incorrect as it does not match the calculated centripetal acceleration. Choice D, 10 m/s², is incorrect as it does not reflect the correct calculation based on the given values.
You may also like to solve these questions
A 60-watt lightbulb is powered by a 110-volt power source. What is the current being drawn?
- A. 0.55 amperes
- B. 1.83 amperes
- C. 50 amperes
- D. 6,600 amperes
Correct Answer: A
Rationale: To calculate the current being drawn, use the formula I = P / V, where I is the current, P is the power in watts, and V is the voltage. Substituting the given values, I = 60 / 110 ≈ 0.55 amperes. Therefore, the current being drawn by the 60-watt lightbulb is approximately 0.55 amperes. Choice B, 1.83 amperes, is incorrect as it does not match the calculated value. Choices C and D, 50 amperes and 6,600 amperes, are significantly higher values and do not align with the expected current draw of a 60-watt lightbulb powered by a 110-volt source.
A 0-kg block on a table is given a push so that it slides along the table. If the block is accelerated at 6 m/s2, what was the force applied to the block?
- A. 0 N
- B. 3 N
- C. 6 N
- D. The answer cannot be determined from the information given.
Correct Answer: A
Rationale: According to Newton's second law of motion,
F=ma. Since the block has a mass of 0 kg, the force applied must be 0 N, as no force is needed to move an object with zero mass.
Capillarity describes the tendency of fluids to rise or fall in narrow tubes. This phenomenon arises from the interplay of:
- A. Buoyancy and pressure differentials
- B. Density variations and compressibility of the fluid
- C. Viscous dissipation and inertial effects
- D. Surface tension at the liquid-gas interface and intermolecular forces
Correct Answer: D
Rationale: Capillarity occurs due to surface tension and intermolecular forces between the liquid and the walls of the narrow tube. These forces cause the liquid to rise or fall depending on the cohesion and adhesion properties. Surface tension at the liquid-gas interface and intermolecular forces are responsible for capillary action, making choice D the correct answer. Choices A, B, and C are incorrect as they do not directly relate to the specific forces involved in capillarity.
When a car is driven for a long time, the pressure of air in the tires increases. This is best explained by which of the following gas laws?
- A. Boyle's law
- B. Charles' law
- C. Gay-Lussac's law
- D. Dalton's law
Correct Answer: C
Rationale: Gay-Lussac's law, also known as the law of pressure-temperature, states that the pressure of a gas is directly proportional to its absolute temperature when the volume is constant. As a car is driven for a long time, the tires heat up due to friction and increased air pressure inside the tires. This results in an increase in temperature, causing the pressure of the air inside the tires to increase according to Gay-Lussac's law. Choices A, B, and D are incorrect. Boyle's law relates pressure and volume, Charles' law relates volume and temperature, and Dalton's law deals with the partial pressures of gases in a mixture.
In hydraulic systems, Pascal's principle states that a pressure change applied to a confined incompressible fluid is:
- A. Amplified but loses energy
- B. Transmitted undiminished throughout the fluid
- C. Limited by the container size
- D. Dependent on the fluid type
Correct Answer: B
Rationale: Pascal's principle states that when a pressure change is applied to a confined incompressible fluid, the resulting pressure change is transmitted undiminished throughout the fluid. This means that the pressure change will be the same at every point in the fluid, regardless of the container size or the type of fluid used. Therefore, choice B is the correct answer. Choices A, C, and D are incorrect because Pascal's principle specifically emphasizes the transmission of pressure without amplification, limitation by container size, or dependence on the fluid type.