Nokea
For the core of an electromagnet, a material with high:
- A. Resistivity is ideal
- B. Permeability is preferred
- C. Permittivity is crucial
- D. Dielectric strength is essential
Correct Answer: B
Rationale: A material with high permeability is preferred for the core of an electromagnet because it allows magnetic field lines to pass through it easily, enhancing the strength of the magnetic field generated. Choice A is incorrect because high resistivity would impede the flow of current in the coil, reducing the strength of the magnetic field. Choice C is incorrect as permittivity is related to electric fields, not magnetic fields. Choice D is also incorrect because dielectric strength is about insulating materials against breakdown under an electric field, not relevant to enhancing magnetic fields.
You may also like to solve these questions
Capillarity describes the tendency of fluids to rise or fall in narrow tubes. This phenomenon arises from the interplay of:
- A. Buoyancy and pressure differentials
- B. Density variations and compressibility of the fluid
- C. Viscous dissipation and inertial effects
- D. Surface tension at the liquid-gas interface and intermolecular forces
Correct Answer: D
Rationale: Capillarity occurs due to surface tension and intermolecular forces between the liquid and the walls of the narrow tube. These forces cause the liquid to rise or fall depending on the cohesion and adhesion properties. Surface tension at the liquid-gas interface and intermolecular forces are responsible for capillary action, making choice D the correct answer. Choices A, B, and C are incorrect as they do not directly relate to the specific forces involved in capillarity.
A 60-watt lightbulb is powered by a 110-volt power source. What is the current being drawn?
- A. 0.55 amperes
- B. 1.83 amperes
- C. 50 amperes
- D. 6,600 amperes
Correct Answer: A
Rationale: To calculate the current being drawn, use the formula I = P / V, where I is the current, P is the power in watts, and V is the voltage. Substituting the given values, I = 60 / 110 ≈ 0.55 amperes. Therefore, the current being drawn by the 60-watt lightbulb is approximately 0.55 amperes. Choice B, 1.83 amperes, is incorrect as it does not match the calculated value. Choices C and D, 50 amperes and 6,600 amperes, are significantly higher values and do not align with the expected current draw of a 60-watt lightbulb powered by a 110-volt source.
What is the purpose of a switch in a circuit?
- A. To reverse the direction of alternating current
- B. To increase the voltage of the battery or cell
- C. To increase the resistance of wires in the circuit
- D. To allow the circuit to open and close
Correct Answer: D
Rationale: The purpose of a switch in a circuit is to allow the circuit to open and close. When the switch is turned on, it provides a complete path for the current to flow through the circuit. When the switch is turned off, it breaks the circuit, stopping the flow of current. This function of opening and closing the circuit using a switch is essential for controlling the flow of electricity in various electrical devices and systems. Choices A, B, and C are incorrect because a switch does not reverse the direction of current, increase voltage, or increase resistance in a circuit; its primary function is to open and close the circuit.
An incandescent lamp consumes 60 Joules of energy per second. What is the power rating of this lamp?
- A. 1 Watt (W)
- B. 60 Watts (W)
- C. 1/60 Joules
- D. Impossible to determine without knowing the voltage
Correct Answer: B
Rationale: Power is defined as energy consumed per unit time. If the lamp consumes 60 Joules of energy per second, the power rating is 60 Watts. Therefore, choice B is correct. Choice A ('1 Watt') is incorrect because the lamp consumes 60 Joules per second, not 1 Joule per second. Choice C ('1/60 Joules') is incorrect as it does not represent the power rating. Choice D ('Impossible to determine without knowing the voltage') is incorrect because power can be calculated using energy consumption per unit time without needing to know the voltage.
In hydraulic systems, Pascal's principle states that a pressure change applied to a confined incompressible fluid is:
- A. Amplified but loses energy
- B. Transmitted undiminished throughout the fluid
- C. Limited by the container size
- D. Dependent on the fluid type
Correct Answer: B
Rationale: Pascal's principle states that when a pressure change is applied to a confined incompressible fluid, the resulting pressure change is transmitted undiminished throughout the fluid. This means that the pressure change will be the same at every point in the fluid, regardless of the container size or the type of fluid used. Therefore, choice B is the correct answer. Choices A, C, and D are incorrect because Pascal's principle specifically emphasizes the transmission of pressure without amplification, limitation by container size, or dependence on the fluid type.