Nokea
A caterpillar starts moving at a rate of 14 in/hr. After 15 minutes, it is moving at a rate of 20 in/hr. What is the caterpillar's rate of acceleration?
- A. 6 in/hr²
- B. 12 in/hr²
- C. 24 in/hr²
- D. 280 in/hr²
Correct Answer: C
Rationale: Acceleration is the change in velocity over time. The change in velocity for the caterpillar is 20 in/hr - 14 in/hr = 6 in/hr. Since this change occurred over 15 minutes (or 0.25 hours), the acceleration can be calculated as (6 in/hr) / (0.25 hr) = 24 in/hr². Therefore, the caterpillar's rate of acceleration is 24 in/hr², which corresponds to choice C. Choice A, 6 in/hr², is incorrect as it does not account for the time factor and the correct calculation. Choice B, 12 in/hr², is incorrect as it doubles the correct acceleration value. Choice D, 280 in/hr², is significantly higher than the correct value, indicating a calculation error.
You may also like to solve these questions
A 780-watt refrigerator is powered by a 120-volt power source. What is the current being drawn?
- A. 660 amperes
- B. 150 amperes
- C. 6.5 amperes
- D. 0.15 amperes
Correct Answer: C
Rationale: To calculate the current being drawn by the refrigerator, you can use the formula: Current (I) = Power (P) / Voltage (V). Given that the power of the refrigerator is 780 watts and the voltage is 120 volts, you can plug these values into the formula to find the current: I = 780 watts / 120 volts = 6.5 amperes. Therefore, the current being drawn by the 780-watt refrigerator is 6.5 amperes. Choice A, 660 amperes, is incorrect as it is significantly higher than the correct answer. Choice B, 150 amperes, is also incorrect and too high. Choice D, 0.15 amperes, is incorrect as it is too low. The correct answer is 6.5 amperes.
In Einstein's mass-energy equation, what is represented by c?
- A. Distance in centimeters
- B. The speed of light
- C. Degrees Celsius
- D. Centrifugal force
Correct Answer: B
Rationale: In Einstein's mass-energy equation, E=mc^2, the symbol 'c' represents the speed of light in a vacuum, which is approximately equal to 3.00 x 10^8 meters per second. This equation demonstrates the equivalence of energy (E) and mass (m) and is a fundamental concept in the theory of relativity. Choice A is incorrect as 'c' does not represent distance in centimeters. Choice C is incorrect as 'c' does not represent degrees Celsius. Choice D is incorrect as 'c' does not represent centrifugal force.
Which of the following statements is true about a refrigerator?
- A. It operates on a Carnot cycle and removes heat from a cold reservoir at a lower temperature.
- B. It violates the first law of thermodynamics by creating cold.
- C. It increases the total entropy of the universe.
- D. It operates isothermally at both the hot and cold reservoirs.
Correct Answer: A
Rationale: A refrigerator operates on a Carnot cycle by transferring heat from a cold reservoir to a hot reservoir. Choice A is correct because a refrigerator removes heat from a cold reservoir at a lower temperature. Choice B is incorrect as a refrigerator does not violate the first law of thermodynamics but rather requires work input to transfer heat. Choice C is incorrect as a refrigerator does not increase the total entropy of the universe. Choice D is incorrect because a refrigerator does not operate isothermally at both the hot and cold reservoirs.
The specific heat capacity of water is about 2 J/g°C. How much energy would you need to heat 1 kilogram of water by 10°C?
- A. 420 J
- B. 4,200 J
- C. 42,000 J
- D. 420,000 J
Correct Answer: C
Rationale: The formula to calculate the energy required to heat a substance is Q = m c ΔT, where m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. Given that 1 kilogram of water is equal to 1,000 grams, the mass (m) is 1,000 g, the specific heat capacity (c) of water is 4.2 J/g°C (not 2 J/g°C), and the change in temperature (ΔT) is 10°C. Substituting these values into the formula: Q = 1,000 4.2 10 = 42,000 J. Therefore, the correct energy required to heat 1 kilogram of water by 10°C is 42,000 J. Choices A, B, and D are incorrect as they do not consider the correct specific heat capacity of water or the conversion of mass to grams.
The Reynolds number (Re) is a dimensionless quantity used to characterize:
- A. Fluid density
- B. Flow regime (laminar vs. turbulent)
- C. Surface tension effects
- D. Buoyancy force magnitude
Correct Answer: B
Rationale: The Reynolds number is a dimensionless quantity used to characterize the flow regime, specifically whether it is laminar (smooth) or turbulent (chaotic). It depends on the velocity of the fluid, its characteristic length (such as pipe diameter), and its viscosity. A low Reynolds number indicates laminar flow, while a high Reynolds number suggests turbulence. Choices A, C, and D are incorrect because the Reynolds number is not related to fluid density, surface tension effects, or buoyancy force magnitude.