Nokea
A wave moves through its medium at 20 m/s with a wavelength of 4 m. What is the frequency of the wave?
- A. 5 s−1
- B. 16 s−1
- C. 24 s−1
- D. 80 s−1
Correct Answer: C
Rationale: The formula to calculate the frequency of a wave is given by:
You may also like to solve these questions
An object moves 100 m in 10 s. What is the velocity of the object over this time?
- A. 10 m/s
- B. 90 m/s
- C. 110 m/s
- D. 1,000 m/s
Correct Answer: A
Rationale: Velocity is calculated as the displacement divided by the time taken to cover that displacement. In this case, the object moves 100 meters in 10 seconds. Therefore, the velocity is 100 m / 10 s = 10 m/s. Choice B, 90 m/s, is incorrect as it doesn't match the calculated velocity. Choice C, 110 m/s, is incorrect as it is higher than the calculated velocity. Choice D, 1,000 m/s, is incorrect as it is significantly higher than the calculated velocity.
In a U-tube manometer, a fluid is used to measure pressure differences. When one side is connected to a pressurized system, the fluid level on that side will:
- A. Remain the same
- B. Decrease
- C. Increase
- D. Depend on the type of fluid used
Correct Answer: B
Rationale: In a U-tube manometer, the side connected to a pressurized system will experience a decrease in fluid level due to the pressure exerted by the system. This pressure forces the fluid down, causing the fluid level to decrease. Therefore, choice B is correct. Choices A and C are incorrect because the fluid level will not remain the same or increase when connected to a pressurized system. Choice D is incorrect as the type of fluid used does not determine the direction of the fluid movement in response to pressure.
A 1,000-kg car drives at 10 m/s around a circle with a radius of 50 m. What is the centripetal acceleration of the car?
- A. 2 m/s²
- B. 4 m/s²
- C. 5 m/s²
- D. 10 m/s²
Correct Answer: A
Rationale: Centripetal acceleration is calculated using the formula a = v² / r, where v = 10 m/s and r = 50 m. Substituting these values: a = (10 m/s)² / 50 m = 100 / 50 = 2 m/s². Therefore, the correct answer is 2 m/s². Choice B, 4 m/s², is incorrect because it is not the result of the correct calculation. Choice C, 5 m/s², is incorrect as it does not match the calculated centripetal acceleration. Choice D, 10 m/s², is incorrect as it does not reflect the correct calculation based on the given values.
What is the electric field inside a hollow conductor with a net charge?
- A. Remains constant
- B. Decreases
- C. Zero
- D. Becomes unpredictable
Correct Answer: C
Rationale: The correct answer is C: Zero. According to Gauss's Law, the electric field inside a hollow conductor (a conductor with no charge inside but a net charge on its surface) is zero. The charges reside on the outer surface of the conductor, causing the electric field inside to cancel out. Choices A, B, and D are incorrect because the electric field inside a hollow conductor with a net charge is not constant, does not decrease, and does not become unpredictable; it is zero due to the distribution of charges on its surface.
Given the four wires described here, which would you expect to have the greatest resistance?
- A. 1 km of American wire gauge 1; diameter 7.35 mm
- B. 1 km of American wire gauge 2; diameter 6.54 mm
- C. 1 km of American wire gauge 3; diameter 5.83 mm
- D. 1 km of American wire gauge 4; diameter 5.19 mm
Correct Answer: D
Rationale: The wire with the greatest resistance is the one with the smallest diameter, as resistance is inversely proportional to cross-sectional area. Gauge 4 with a 5.19 mm diameter has the smallest diameter and, therefore, the greatest resistance. Choice A, B, and C have larger diameters compared to choice D, so they would have lower resistance values.