Nokea
An object with a charge of 3 μC is placed 30 cm from another object with a charge of 2 μC. What is the magnitude of the resulting force between the objects?
- A. 0.6 N
- B. 0.18 N
- C. 180 N
- D. 9 10−12 N
Correct Answer: B
Rationale: To find the magnitude of the resulting force between two charges, we use Coulomb's Law:
F = k (|q1 q2|) / r²
Where:
F is the force
k is Coulomb's constant (8.99 10â¹ N·m²/C²)
q1 and q2 are the charges
r is the distance between the charges
Plugging in the values:
F = (8.99 10â¹) (3 10â»â¶) (2 10â»â¶) / (0.3)² = 0.18 N.
Therefore, the magnitude of the resulting force is 0.18 N.
You may also like to solve these questions
Which conclusion can be drawn from Ohm's law?
- A. Voltage and current are inversely proportional when resistance is constant.
- B. The ratio of the potential difference between the ends of a conductor to current is a constant, R.
- C. Voltage is the amount of charge that passes through a point per second.
- D. Power (P) can be calculated by multiplying current (I) by voltage (V).
Correct Answer: B
Rationale: Ohm's law states that the ratio of the potential difference (voltage) between the ends of a conductor to the current flowing through it is a constant. Mathematically, this is represented as V = I x R, where V is voltage, I is current, and R is the constant resistance. Therefore, the correct conclusion that can be drawn from Ohm's law is that the ratio of the potential difference between the ends of a conductor to current is a constant, denoted as R. This relationship is fundamental to understanding the behavior of electrical circuits and the effect of resistance on voltage and current. Choice A is incorrect because Ohm's law actually states that voltage and current are directly proportional when resistance is constant. Choice C is incorrect because voltage is not the amount of charge that passes through a point per second; rather, it is the electric potential energy per unit charge. Choice D is incorrect because although power (P) can be calculated by multiplying current (I) by voltage (V), this is not a conclusion directly drawn from Ohm's law.
If the force acting on an object is doubled, how does its acceleration change?
- A. It remains the same.
- B. It is halved.
- C. It is doubled.
- D. It is eliminated.
Correct Answer: C
Rationale: According to Newton's second law of motion, the acceleration of an object is directly proportional to the force acting on it. Therefore, if the force acting on an object is doubled, its acceleration will also double. This relationship is expressed by the equation F = ma, where F is the force, m is the mass of the object, and a is the acceleration. When the force (F) is doubled, the acceleration (a) will also double, assuming the mass remains constant. Choice A is incorrect because acceleration changes with a change in force. Choice B is incorrect because acceleration and force are directly proportional. Choice D is incorrect because increasing the force acting on an object does not eliminate its acceleration; instead, it results in an increase in acceleration, as per Newton's second law.
What force was applied to the object that was moved if 100 Nâ‹…m of work is done over 20 m?
- A. 5 N
- B. 80 N
- C. 120 N
- D. 2,000 N
Correct Answer: A
Rationale: Work is calculated using the formula Work = Force x Distance. Given that 100 Nâ‹…m of work is done over 20 m, we can rearrange the formula to solve for Force. Force = Work / Distance. Plugging in the values, we get Force = 100 Nâ‹…m / 20 m = 5 N. Therefore, the force applied to the object that was moved is 5 N.
Choice B (80 N) is incorrect because it doesn't match the calculated force of 5 N. Choice C (120 N) is incorrect as it is higher than the calculated force. Choice D (2,000 N) is incorrect as it is significantly higher than the correct force of 5 N.
Fluid dynamics is a subfield of fluid mechanics concerned with:
- A. Equilibrium properties of fluids at rest (Fluid Statics)
- B. The motion and behavior of fluids under various conditions
- C. Phase transitions of fluids between liquid, gas, and solid states
- D. Engineering applications of fluids (related but broader than fluid dynamics)
Correct Answer: B
Rationale: Fluid dynamics is the study of fluids in motion and their behavior under different conditions, including how they flow, mix, and interact with their surroundings. It focuses on the dynamic aspects of fluids rather than their static properties when at rest, which is the realm of fluid statics. Phase transitions of fluids between liquid, gas, and solid states are more related to thermodynamics than fluid dynamics. While engineering applications involve fluid dynamics, the field itself is more specialized in studying the movement and behavior of fluids.
Which of the following materials has the lowest density?
- A. Water
- B. Cork
- C. Aluminum
- D. Steel
Correct Answer: B
Rationale: Cork has the lowest density among the given options. Cork is a lightweight material derived from the bark of cork oak trees and is known for its low density, making it float on water. Water, aluminum, and steel have higher densities compared to cork. Water is denser than cork because it has a consistent density of 1 g/cm³. Aluminum and steel are metals with much higher densities due to their atomic structures, making them denser than cork.