Nokea
The Prandtl number (Pr) is a dimensionless property relating:
- A. Viscosity and thermal diffusivity
- B. Density and pressure
- C. Surface tension and pressure
- D. Reynolds number and flow regime
Correct Answer: A
Rationale: The Prandtl number (Pr) is a dimensionless number used to characterize fluid flow. It is the ratio of momentum diffusivity to thermal diffusivity. In simpler terms, it relates the ability of a fluid to conduct heat to its ability to conduct momentum. Therefore, the correct relationship is between viscosity and thermal diffusivity, making choice A the correct answer. Choices B, C, and D are incorrect because they do not represent the properties that the Prandtl number relates.
You may also like to solve these questions
When a dielectric material is inserted between the plates of a charged capacitor, what will happen to the capacitance?
- A. Increase
- B. Decrease
- C. Remain the same
- D. Become unpredictable
Correct Answer: A
Rationale: When a dielectric material is inserted between the plates of a charged capacitor, the capacitance will increase. This is because the presence of a dielectric material reduces the electric field between the plates, allowing more charge to be stored for a given voltage, thus increasing the capacitance. Choice B is incorrect because adding a dielectric material increases capacitance. Choice C is incorrect because capacitance changes when a dielectric is added. Choice D is incorrect because the effect of a dielectric on capacitance is predictable.
An object has a constant velocity of 50 m/s and travels for 10 s. What is the acceleration of the object?
- A. 0 m/s²
- B. 5 m/s²
- C. 60 m/s²
- D. 500 m/s²
Correct Answer: A
Rationale: The acceleration of an object is defined as the rate of change of its velocity. When an object has a constant velocity, it means there is no change in its speed or direction. In this case, the object maintains a constant velocity of 50 m/s for 10 seconds, which implies that there is no change in velocity. Therefore, the acceleration of the object is 0 m/s² as there is no acceleration or deceleration happening. Choices B, C, and D are incorrect because acceleration is the change in velocity over time, and in this scenario of constant velocity, the acceleration is 0 m/s².
In a circuit with three same-size resistors wired in series to a 9-V power supply, producing 1 amp of current, what is the resistance of each resistor?
- A. 9 ohms
- B. 6 ohms
- C. 3 ohms
- D. 1 ohm
Correct Answer: C
Rationale: In a series circuit, the total resistance is the sum of the individual resistances. With a total voltage of 9 V and a current of 1 A, we can use Ohm's Law (V = I R) to find the total resistance: Total resistance = 9 V / 1 A = 9 ohms. Since the resistors are identical and wired in series, the total resistance is evenly divided among the three resistors: Resistance of each resistor = 9 ohms / 3 = 3 ohms. Thus, the resistance of each resistor is 3 ohms. Therefore, the correct answer is 3 ohms. Choice A, 9 ohms, is incorrect because this would be the total resistance of all three resistors combined in series. Choice B, 6 ohms, is incorrect as it does not account for the equal distribution of resistance in a series circuit. Choice D, 1 ohm, is incorrect as it is too low for resistors in series with a total resistance of 9 ohms.
When analyzing a power plant, which of the following is NOT considered a part of the system?
- A. The fuel being burned.
- B. The working fluid (e.g., steam or water).
- C. The turbine that generates electricity.
- D. The surrounding air.
Correct Answer: D
Rationale: In a power plant system, the components directly involved in the energy conversion process are considered part of the system. The fuel being burned provides the heat source, the working fluid transfers this heat energy, and the turbine converts it into mechanical energy to generate electricity. The surrounding air, while it may interact with the system, is not a component that directly participates in the energy conversion process within the power plant system. Therefore, the correct answer is D - The surrounding air. Choices A, B, and C are essential components of a power plant system as they play direct roles in the energy conversion process, unlike the surrounding air.
A hummingbird's wings beat at 25 beats per second. What is the period of the wing beating in seconds?
- A. 0.04 s
- B. 0.25 s
- C. 0.4 s
- D. 4 s
Correct Answer: A
Rationale: The period represents the time for one complete cycle of the wing beating. To calculate the period, you take the reciprocal of the frequency. In this case, with the wings beating at 25 beats per second, the period is 1/25, which equals 0.04 seconds. Therefore, choice A, 0.04 seconds, is correct. Choices B, C, and D are incorrect because they do not reflect the correct calculation of the period based on the given frequency of 25 beats per second.