Nokea
The specific heat capacity of tin is 217 J/(g°C). Which of these materials would require about twice as much heat as tin to increase the temperature of a sample by 1°C?
- A. Copper [0.3844 J/(g°C)]
- B. Iron [0.449 J/(g°C)]
- C. Gold [0.1291 J/(g°C)]
- D. Aluminum [0.904 J/(g°C)]
Correct Answer: D
Rationale: The correct answer is D: Aluminum. The specific heat capacity of aluminum is 0.904 J/(g°C), which is approximately 4 times that of tin. For a material to require about twice as much heat as tin to increase the temperature by 1°C, it should have a specific heat capacity roughly double that of tin. Therefore, aluminum fits this criterion better than the other options. Gold has a much lower specific heat capacity than tin, so it would require less, not more, heat to increase the temperature by 1°C. Copper and Iron also have specific heat capacities lower than tin, making them incorrect choices for requiring twice as much heat as tin.
You may also like to solve these questions
The efficiency (η) of a heat engine is defined as the ratio of the net work done (Wnet) by the engine to the heat input (Qh) from the hot reservoir. The relationship is expressed as:
- A. η = Wnet / Qh
- B. η = Qh / Wnet
- C. η = Wnet x Qh
- D. η = (Wnet + Qh) / 2
Correct Answer: A
Rationale: The correct formula for efficiency (η) of a heat engine is η = Wnet / Qh. Efficiency is defined as the ratio of the net work done by the engine (Wnet) to the heat input from the hot reservoir (Qh). This formula shows how effectively the engine converts heat into useful work, making choice A the correct answer. Choices B, C, and D present incorrect relationships between efficiency, net work done, and heat input, leading to their incorrectness.
In a circuit with three same-size resistors wired in series to a 9-V power supply, producing 1 amp of current, what is the resistance of each resistor?
- A. 9 ohms
- B. 6 ohms
- C. 3 ohms
- D. 1 ohm
Correct Answer: C
Rationale: In a series circuit, the total resistance is the sum of the individual resistances. With a total voltage of 9 V and a current of 1 A, we can use Ohm's Law (V = I R) to find the total resistance: Total resistance = 9 V / 1 A = 9 ohms. Since the resistors are identical and wired in series, the total resistance is evenly divided among the three resistors: Resistance of each resistor = 9 ohms / 3 = 3 ohms. Thus, the resistance of each resistor is 3 ohms. Therefore, the correct answer is 3 ohms. Choice A, 9 ohms, is incorrect because this would be the total resistance of all three resistors combined in series. Choice B, 6 ohms, is incorrect as it does not account for the equal distribution of resistance in a series circuit. Choice D, 1 ohm, is incorrect as it is too low for resistors in series with a total resistance of 9 ohms.
An object has a constant velocity of 50 m/s and travels for 10 s. What is the acceleration of the object?
- A. 0 m/s²
- B. 5 m/s²
- C. 60 m/s²
- D. 500 m/s²
Correct Answer: A
Rationale: The acceleration of an object is defined as the rate of change of its velocity. When an object has a constant velocity, it means there is no change in its speed or direction. In this case, the object maintains a constant velocity of 50 m/s for 10 seconds, which implies that there is no change in velocity. Therefore, the acceleration of the object is 0 m/s² as there is no acceleration or deceleration happening. Choices B, C, and D are incorrect because acceleration is the change in velocity over time, and in this scenario of constant velocity, the acceleration is 0 m/s².
Ocean waves build during a storm until there is a vertical distance from the high point to the low point of 6 meters and a horizontal distance of 9 meters between adjacent crests. The waves hit the shore every 5 seconds. What is the speed of the waves?
- A. 1.2 m/s
- B. 1.8 m/s
- C. 2.0 m/s
- D. 2.4 m/s
Correct Answer: B
Rationale: To find the speed of the waves, we use the formula: speed = wavelength / period. The wavelength is the horizontal distance between adjacent crests, which is 9 meters in this case. The period is the time it takes for one wave to pass a fixed point, given as 5 seconds. Therefore, speed = 9 meters / 5 seconds = 1.8 m/s. Choice A (1.2 m/s) is incorrect because it miscalculates the speed. Choice C (2.0 m/s) and Choice D (2.4 m/s) are incorrect as they do not correctly calculate the speed using the provided data.
Enthalpy (H) is a thermodynamic property defined as the sum of a system's internal energy (U) and the product of its pressure (P) and volume (V). The relationship between these is:
- A. H = U + PV
- B. H = U - PV
- C. H = U / PV
- D. H = PV / U
Correct Answer: A
Rationale: Enthalpy (H) is defined as H = U + PV, where U represents internal energy, P is pressure, and V is volume. Enthalpy includes both the internal energy of a system and the energy required to create space for the system against an external pressure. Therefore, the correct relationship between enthalpy, internal energy, pressure, and volume is H = U + PV. Choice B is incorrect as subtracting PV would not account for the work done against pressure. Choice C is incorrect as dividing U by PV doesn't represent the definition of enthalpy. Choice D is incorrect as dividing PV by U is not the correct relationship based on the definition of enthalpy.