Nokea
What is the primary factor responsible for generating lift on an airplane wing?
- A. Propulsion force generated by the engines
- B. Buoyant forces acting on the entire aircraft
- C. Drag reduction achieved through streamlining
- D. Application of Bernoulli's principle to the airfoil's shape
Correct Answer: D
Rationale: The primary factor responsible for generating lift on an airplane wing is the application of Bernoulli's principle. This principle states that the air moving over the curved top surface of the wing has to travel faster, leading to reduced pressure above the wing and creating lift. Engines provide thrust for propulsion, not lift. Buoyant forces are more relevant to lighter-than-air aircraft like balloons or airships, not airplanes. While drag reduction through streamlining is important for efficiency, it is not the primary factor in lift generation. Therefore, the correct answer is D.
You may also like to solve these questions
A 3-volt flashlight uses a bulb with 60-ohm resistance. What current flows through the flashlight?
- A. o.05 amp
- B. o.5 amp
- C. 1.8 amp
- D. 18 amp
Correct Answer: A
Rationale: : Using Ohm's Law, I = V / R:
I = 3 / 60 = 0.05 amp.
So, the correct current is 0.05 amp.
Two balloons with charges of 5 μC each are placed 25 cm apart. What is the magnitude of the resulting repulsive force between them?
- A. 0.18 N
- B. 1.8 N
- C. 10−3 N
- D. 5 10−3 N
Correct Answer: B
Rationale: To find the repulsive force between the two charges, we use Coulomb's law: F = k(q1 * q2) / r^2. Here, k is the Coulomb constant (8.99 x 10^9 Nm^2/C^2), q1 and q2 are the charges (5 μC each), and r is the distance between the charges (25 cm = 0.25 m). Substituting these values into the formula: F = (8.99 x 10^9 Nm^2/C^2)(5 x 10^-6 C)(5 x 10^-6 C) / (0.25 m)^2. Calculating this gives F = 1.8 N. Therefore, the magnitude of the resulting repulsive force between the two balloons is 1.8 N. Choice A, C, and D are incorrect as they do not correctly calculate the force using Coulomb's law.
Why does potential energy increase as particles approach each other?
- A. Attractive forces increase.
- B. Attractive forces decrease.
- C. Repulsive forces increase.
- D. Repulsive forces decrease.
Correct Answer: C
Rationale: The correct answer is C: Repulsive forces increase. As particles approach each other, the distance between them decreases, causing the repulsive forces between the particles to increase. This increase in repulsive forces leads to an increase in potential energy as the particles resist being pushed closer together. Choices A and B are incorrect because attractive forces do not increase or decrease in this scenario. Choice D is incorrect because repulsive forces actually increase as particles get closer, leading to a rise in potential energy.
Capillarity describes the tendency of fluids to rise or fall in narrow tubes. This phenomenon arises from the interplay of:
- A. Buoyancy and pressure differentials
- B. Density variations and compressibility of the fluid
- C. Viscous dissipation and inertial effects
- D. Surface tension at the liquid-gas interface and intermolecular forces
Correct Answer: D
Rationale: Capillarity occurs due to surface tension and intermolecular forces between the liquid and the walls of the narrow tube. These forces cause the liquid to rise or fall depending on the cohesion and adhesion properties. Surface tension at the liquid-gas interface and intermolecular forces are responsible for capillary action, making choice D the correct answer. Choices A, B, and C are incorrect as they do not directly relate to the specific forces involved in capillarity.
The drag force (F_d) experienced by an object moving through a fluid depends on:
- A. Object's shape and size only
- B. Fluid properties and object velocity
- C. Depth of submersion only
- D. Buoyant force acting on the object
Correct Answer: B
Rationale: The drag force experienced by an object moving through a fluid depends on multiple factors, including the object's shape, size, velocity, and the fluid's properties such as viscosity and density. Choices A, C, and D are incorrect because drag force is not solely determined by the object's shape and size, depth of submersion, or buoyant force acting on the object. The primary factors affecting drag force are the fluid properties and the object's velocity. Therefore, the correct answer is B.