Nokea
The specific heat capacity of tin is 217 J/(g°C). Which of these materials would require about twice as much heat as tin to increase the temperature of a sample by 1°C?
- A. Copper [0.3844 J/(g°C)]
- B. Iron [0.449 J/(g°C)]
- C. Gold [0.1291 J/(g°C)]
- D. Aluminum [0.904 J/(g°C)]
Correct Answer: D
Rationale: The correct answer is D: Aluminum. The specific heat capacity of aluminum is 0.904 J/(g°C), which is approximately 4 times that of tin. For a material to require about twice as much heat as tin to increase the temperature by 1°C, it should have a specific heat capacity roughly double that of tin. Therefore, aluminum fits this criterion better than the other options. Gold has a much lower specific heat capacity than tin, so it would require less, not more, heat to increase the temperature by 1°C. Copper and Iron also have specific heat capacities lower than tin, making them incorrect choices for requiring twice as much heat as tin.
You may also like to solve these questions
When analyzing a power plant, which of the following is NOT considered a part of the system?
- A. The fuel being burned.
- B. The working fluid (e.g., steam or water).
- C. The turbine that generates electricity.
- D. The surrounding air.
Correct Answer: D
Rationale: In a power plant system, the components directly involved in the energy conversion process are considered part of the system. The fuel being burned provides the heat source, the working fluid transfers this heat energy, and the turbine converts it into mechanical energy to generate electricity. The surrounding air, while it may interact with the system, is not a component that directly participates in the energy conversion process within the power plant system. Therefore, the correct answer is D - The surrounding air. Choices A, B, and C are essential components of a power plant system as they play direct roles in the energy conversion process, unlike the surrounding air.
An object has a constant velocity of 50 m/s and travels for 10 s. What is the acceleration of the object?
- A. 0 m/s²
- B. 5 m/s²
- C. 60 m/s²
- D. 500 m/s²
Correct Answer: A
Rationale: The acceleration of an object is defined as the rate of change of its velocity. When an object has a constant velocity, it means there is no change in its speed or direction. In this case, the object maintains a constant velocity of 50 m/s for 10 seconds, which implies that there is no change in velocity. Therefore, the acceleration of the object is 0 m/s² as there is no acceleration or deceleration happening. Choices B, C, and D are incorrect because acceleration is the change in velocity over time, and in this scenario of constant velocity, the acceleration is 0 m/s².
Household alternating current typically has a frequency of 60 Hz. Which statement is true?
- A. The circuit is suitable for lighting 60-watt bulbs.
- B. Circuits in the home may carry a current of 60 amperes.
- C. The expected voltage drop is 60 volts per meter.
- D. Electrons complete a cycle 60 times per second.
Correct Answer: D
Rationale: The correct answer is D. Electrons complete a cycle 60 times per second when the frequency of the current is 60 Hz. This frequency indicates that the current changes direction 60 times per second, causing the electrons to complete a full cycle back and forth through the circuit at the same rate. Choice A is incorrect because the power rating of a bulb (in watts) is not directly related to the frequency of the current. Choice B is incorrect as typical household circuits do not carry currents as high as 60 amperes. Choice C is incorrect as the expected voltage drop is not measured in volts per meter for household alternating current circuits.
In open-channel flow, a critical property is the free surface, which refers to the:
- A. Interface between the liquid and the container walls
- B. Interface between the liquid and a surrounding gas
- C. Bottom of the channel
- D. Region of highest velocity within the liquid
Correct Answer: B
Rationale: The free surface in open-channel flow refers to the interface between the liquid and the surrounding gas, typically the atmosphere. This interface is critical as it determines the boundary between the liquid flow and the open environment. Option A is incorrect as it refers to the liquid-container wall interface, not the free surface. Option C is incorrect because it represents the bottom of the channel, not the free surface. Option D is incorrect as it describes the region of highest velocity within the liquid, not the free surface. Therefore, the correct choice is B.
What is the net force acting on the car?
- A. 450 N
- B. 700 N
- C. 1,500 N
- D. 6,300 N
Correct Answer: C
Rationale: To determine the net force acting on an object, we need to consider the sum of the forces acting in the same direction and subtract the forces acting in the opposite direction. In this scenario, there is a force of 4,200 N to the right and a force of 2,700 N to the left. By subtracting the leftward force from the rightward force (4,200 N - 2,700 N), we find that the net force acting on the car is 1,500 N to the right. Therefore, choice C, 1,500 N, is the correct answer. Choice A, 450 N, is too small as it does not account for the total forces involved. Choice B, 700 N, is also incorrect as it is not the result of the correct mathematical operation on the given forces. Choice D, 6,300 N, is too large and does not align with the calculation based on the forces provided.