Nokea
A key parameter in fluid selection is specific gravity (SG). For a submerged object in a reference fluid (often water), SG = Ï_object / Ï_reference. An object with SG > 1 will:
- A. Experience a net buoyant force acting upwards
- B. Experience a net buoyant force acting downwards
- C. Remain neutrally buoyant
- D. Require knowledge of the object's volume for buoyancy determination
Correct Answer: A
Rationale: When the specific gravity (SG) of an object is greater than 1, it indicates that the object is denser than the reference fluid, which is often water. According to Archimedes' principle, an object with SG > 1 will experience a net buoyant force acting upwards when submerged in the fluid. This is because the buoyant force is greater than the weight of the object, causing it to float. Therefore, the correct answer is A: 'Experience a net buoyant force acting upwards.' Objects with SG < 1 would sink as they are less dense than the fluid, while objects with SG = 1 would be neutrally buoyant, neither sinking nor floating.
You may also like to solve these questions
An airplane travels 500 miles northeast and then, on the return trip, travels 500 miles southwest. Which of the following is true?
- A. The displacement of the plane is 1,000 miles, and the distance traveled is 0 miles.
- B. The displacement of the plane is 1,000 miles, and the distance traveled is 1,000 miles.
- C. The displacement of the plane is 0 miles, and the distance traveled is 0 miles.
- D. The displacement of the plane is 0 miles, and the distance traveled is 1,000 miles.
Correct Answer: D
Rationale: The displacement of an object is the change in position from the starting point to the ending point, regardless of the path taken. In this case, the airplane returns to its original position after traveling 500 miles northeast and then 500 miles southwest. Therefore, the displacement is 0 miles. However, the distance traveled is the total path covered, which is 500 miles northeast plus 500 miles southwest, for a total of 1,000 miles. Choice A is incorrect because the displacement is not the sum of the distances traveled. Choice B is incorrect as it incorrectly states that both the displacement and the distance traveled are 1,000 miles. Choice C is incorrect as it states that both the displacement and the distance traveled are 0 miles, which is not the case.
A bicycle and a car are both traveling at a rate of 5 m/s. Which statement is true?
- A. The bicycle has more kinetic energy than the car.
- B. The bicycle has less kinetic energy than the car.
- C. Both vehicles have the same amount of kinetic energy.
- D. Only the car has kinetic energy.
Correct Answer: B
Rationale: Kinetic energy is determined by both the mass and the velocity of an object. While both the bicycle and the car are moving at the same velocity (5 m/s), the car has significantly more mass than the bicycle. As a result, the car has more kinetic energy than the bicycle, even though their speeds are identical. Therefore, choice B is correct. Choices A, C, and D are incorrect because they do not consider the influence of mass on kinetic energy. Choice A is incorrect as the car has more kinetic energy due to its greater mass. Choice C is incorrect because the vehicles have different masses. Choice D is incorrect as both the bicycle and the car possess kinetic energy.
A 110-volt hair dryer delivers 1,525 watts of power. How many amperes does it draw?
- A. 167.75 amperes
- B. 1.635 amperes
- C. 1.415 amperes
- D. 13.9 amperes
Correct Answer: D
Rationale: To determine the amperes drawn by the hair dryer, we use the formula: Amperes = Watts / Volts. The hair dryer operates at 1,525 watts with 110 volts. Dividing 1,525 watts by 110 volts yields 13.9 amperes. Therefore, the correct answer is 13.9 amperes. Choices A, B, and C are incorrect because they do not result from the correct calculation using the formula.
Four 5 V batteries are connected in series. What is the total voltage of the circuit?
- A. 5.0 V
- B. 10.0 V
- C. 15.0 V
- D. 20.0 V
Correct Answer: D
Rationale: When batteries are connected in series, their voltages add up. Therefore, the total voltage of the circuit with four 5 V batteries connected in series will be 5 V + 5 V + 5 V + 5 V = 20 V. Choices A, B, and C are incorrect because the voltages of the batteries add up in series, resulting in a total of 20 V.
In an adiabatic process, there is:
- A. No heat transfer (Q = 0) between the system and the surroundings.
- B. Isothermal compression or expansion (constant temperature).
- C. Constant pressure throughout the process (isobaric process).
- D. No change in the system's internal energy (energy is conserved according to the first law).
Correct Answer: A
Rationale: In an adiabatic process, choice A is correct because adiabatic processes involve no heat transfer between the system and its surroundings (Q = 0). This lack of heat transfer is a defining characteristic of adiabatic processes. Choices B, C, and D do not accurately describe an adiabatic process. Choice B refers to an isothermal process where temperature remains constant, not adiabatic. Choice C describes an isobaric process with constant pressure, not specific to adiabatic processes. Choice D mentions the conservation of energy but does not directly relate to the absence of heat transfer in adiabatic processes.