Nokea
How might the energy use of an appliance be expressed?
- A. Power = energy time
- B. Time + energy = power
- C. Energy = power time
- D. Energy/power = time
Correct Answer: C
Rationale: The energy use of an appliance can be expressed using the formula Energy = Power Time. In this formula, Energy represents the amount of electricity consumed by the appliance, Power indicates the rate at which the appliance uses electricity (measured in watts), and Time represents the duration for which the appliance is being used (measured in hours). By multiplying the power rating of the appliance by the time it is in use, one can calculate the total energy consumed. Option C is the correct choice because it accurately represents the relationship between power, time, and energy. Choices A, B, and D present incorrect representations of the relationship between energy, power, and time, making them wrong answers.
You may also like to solve these questions
In fluid dynamics, the continuity equation, a fundamental principle, expresses the conservation of:
- A. Momentum
- B. Mass
- C. Energy
- D. Angular momentum
Correct Answer: B
Rationale: The continuity equation in fluid dynamics is a statement of the conservation of mass, making choice B the correct answer. It states that the mass entering a system must equal the mass leaving the system, assuming no mass is created or destroyed within the system. Conservation of momentum (choice A) is related to Newton's laws of motion and is not directly expressed by the continuity equation. Conservation of energy (choice C) involves different principles like the first law of thermodynamics and is not the focus of the continuity equation. Angular momentum (choice D) is also a different concept related to rotational motion and not described by the continuity equation.
A solenoid is a long, tightly wound coil of wire that acts like a bar magnet when current flows through it. The magnetic field lines inside a solenoid are most similar to the field lines around:
- A. A single straight current-carrying wire
- B. A horseshoe magnet
- C. A permanent bar magnet
- D. A flat sheet conductor
Correct Answer: C
Rationale: The magnetic field lines inside a solenoid resemble the field lines around a permanent bar magnet. Both a solenoid and a bar magnet have north and south poles, resulting in a similar pattern of magnetic field lines. A single straight current-carrying wire produces a different field pattern because it has no coil structure like a solenoid. A horseshoe magnet has a unique field shape due to its pole arrangement, different from the uniform field pattern of a solenoid. A flat sheet conductor does not exhibit the same magnetic field characteristics as a solenoid, as it lacks the coil shape and alignment of a solenoid's magnetic field.
How do you determine the velocity of a wave?
- A. Multiply the frequency by the wavelength.
- B. Add the frequency and the wavelength.
- C. Subtract the wavelength from the frequency.
- D. Divide the wavelength by the frequency.
Correct Answer: A
Rationale: The velocity of a wave can be determined by multiplying the frequency of the wave by the wavelength. This relationship is given by the formula: velocity = frequency wavelength. By multiplying the frequency by the wavelength, you can calculate the speed at which the wave is traveling. This formula is derived from the basic wave equation v = f λ, where v represents velocity, f is frequency, and λ is wavelength. Therefore, to find the velocity of a wave, one must multiply its frequency by its wavelength. Choices B, C, and D are incorrect. Adding, subtracting, or dividing the frequency and wavelength does not yield the correct calculation for wave velocity. The correct formula for determining wave velocity is to multiply the frequency by the wavelength.
Longitudinal waves have vibrations that move ___________.
- A. at right angles to the direction of the vibrations
- B. in the direction opposite to that of the wave
- C. in the same direction as the wave
- D. in waves and troughs
Correct Answer: C
Rationale: In longitudinal waves, the vibrations of particles occur in the same direction as the wave propagates. This means the particles move back and forth in the direction of the wave, creating compressions and rarefactions along the wave. Therefore, the correct choice is C, in the same direction as the wave. Choice A is incorrect because transverse waves, not longitudinal waves, have vibrations at right angles to the direction of wave propagation. Choice B is incorrect as it describes the motion in transverse waves. Choice D is incorrect as it is an inaccurate representation of how longitudinal waves propagate.
Which of the following describes a vector quantity?
- A. 5 miles per hour due southwest
- B. 5 miles per hour
- C. 5 miles
- D. None of the above
Correct Answer: A
Rationale: A vector quantity is characterized by both magnitude and direction. In the provided options, choice A, '5 miles per hour due southwest,' fits this definition as it includes both the magnitude (5 miles per hour) and the direction (southwest), making it a vector quantity. Choices B and C only provide the magnitude without indicating any direction, hence they do not represent vector quantities.